SanDisk Sansa m200 Series User Manual

What You Need to Begin
To add music to the Sansa m200 series MP3 player, the following are needed:
■ Intel Pentium PC or equivalent.
■ Windows XP (Windows Media Player 9 or 10).
■ CD-ROM drive.
■ USB 2.0 port for high-speed transfer.
■ Supports MP3, WMA, secure WMA and Audible audio file formats.
Your Sansa Package contains:
■ Sansa m200 Series MP3 Player
■ Earphones
■ Armband and Case
■ AAA battery
■ USB 2.0 Travel Cable
■ CD with User Manual
■ Quick Start Guide
Installing the Battery
Follow the steps as shown in Figure 1:
1. Turn your player over, so the backside faces up, and locate the battery door at
the back of the player.
2. Gently depress the catch at the bottom of the battery cover and lift up.
3. Lift off the battery cover.
4. Push the battery down into the battery area of the player, placing the flat end (–)
of the battery against the spring in the battery area. The protruded top (+) of the
battery slips down and under. The battery should fit snugly.
5. Replace the battery cover until it snaps closed.
Quick Start 2
▲

SanDisk Sansa m200 Series Specifications

General

Brand	SanDisk
Model	Sansa m200 Series
Category	MP3 Player
Language	English