SanDisk Sansa m200 Series User Manual

3
This chapter helps you get started recording sound
with your SanDisk
®
Sansa™ m200 Series MP3
Player.
Voice Recording
Your player has a recording mode that can record voice to file. This chapter helps you to
become familiar with the Recorder features.
Using the Recorder Controls
Your player has two modes of operation: Play Music and Recorder. To record your voice, you
need to be in Recorder mode. Follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can’t find the Power/Menu Button on your
player? See The Basic Controls section on page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, locate
the Hold Button on the left side of your player. Slide that button up to unlock
your device. Then repeat Step 1 above. See The Basic Controls section on
page 3 if you cannot find the Hold Button.
2. If you do not see the Recorder onscreen, briefly press the Power/Menu Button on
the right side of your player. The software Menu will appear. Press the
Repeat/AB/Down Button to scroll and highlight Recorder mode. Press the Select
Button to enter Recorder mode.
Voice Recording 15
▲
▲ ▲

SanDisk Sansa m200 Series Specifications

General

Brand	SanDisk
Model	Sansa m200 Series
Category	MP3 Player
Language	English