Add a Song to the Favorite List
When you are listening to the song and you press and hold the Select button, if the song is
in not in the list, a confirmation message for adding the song to the list will be shown. To
confirm, press the Select button when the check box is highlighted. To cancel, press the |
<<
button to highlight the "X" box, then press the Select button.
Remove a Song from the Favorite List
When you are listening to the song and your press and hold the Select button, if the song is
already in the list, a confirmation message for removing the song from the list will be shown.
To confirm, press the Select button when the check box is highlighted. To cancel, press the
|
<<
button to highlight the "X" box, then press the Select button.
Adjusting Settings
Your player allows you to define the equalizer and repeat settings for music.
Set Equalizer Playback
The sound settings on your Sansa player can be optimized for different music styles using
the onboard five-band equalizer. Follow these steps:
1. Put your player in Play Music mode. See Using the Music Controls on Page 10
if you need help with this step.
2. Briefly press the Power/Menu Button. The software Menu will appear onscreen. See
The Basic Controls section on Page 3 if you cannot find the Power/Menu Button.
3. Press the Repeat/AB/Down Button to scroll to Settings. Press the Select Button
to enter Settings mode.
4. Press the Repeat/AB/Down Button to scroll to the Equalizer item.
5. Press the Select Button to select the Equalizer. Your unit is preset to Custom.
Press Select to manually change the equalizer setting, or save time by pressing
the Repeat/AB/Down Button for preset equalizer levels. Press the Play/Pause/Up
Button to scroll through the Pop, Classical, Jazz and Rock equalizer settings. If
you are playing a song when you change settings, your music will change to the
equalizer setting that is highlighted. Press the Select Button to select the
equalizer setting you want.
6. The custom equalizer configuration screen will appear as a set of five vertical
rectangles that represent five equalizer bands you can define. Press the Next/Fast
Forward Button to move from rectangle to rectangle, from left to right. Press the
Play/Pause/Up Button or Repeat/AB/Down Button to increase or decrease the
setting for each equalizer band.
Playing Music 13
▲
To Next Page
Loading...
Need help?
General
