EasyManua.ls Logo

S&P RESPIRO Series - User Manual

S&P RESPIRO Series
152 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RESPIRO 100 / RESPIRO 100 RD
RESPIRO 150 / RESPIRO 150 RD

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the S&P RESPIRO Series and is the answer not in the manual?

Summary

IMPORTANT RECOMMENDATIONS

General Warnings

Details information for installation, start-up, and safe use of the device.

General Safety Rules

Follow safety instructions to avoid damage and ensure safe operation of the device.

GUARANTEE AND LIABILITY

Product Guarantee Details

Details what is not covered by the product guarantee.

Product Liability

Defines manufacturer liability for damage due to misuse or incorrect installation.

Intended Product Use

Describes the product's purpose as a ventilation system for air renewal in homes and public premises.

Product Description

Technical Parameters

Product Construction

Product Installation

Assembly Procedure

Details the steps for physically assembling the product onto the wall.

Electrical Connections

Provides instructions for connecting the product's electrical wiring.

Assembly Conclusion

Final steps to reassemble the product after electrical connections.

RESPIRO 100;150 Electrical Connections

RESPIRO 100;150 Direct Electrical Connection

Specific instructions for direct electrical connection of RESPIRO 100/150 models.

Remote Wall Command Connection

Explains how to connect and control the product using wall-mounted switches.

RESPIRO 100 RD;150 RD Power Supply Connection

Specific instructions for power supply connection of RESPIRO 100RD/150RD models.

Master-Slave Communication Setup

Details how to connect multiple units in a master-slave configuration.

Remote Control (RD Version)

Protective Label Removal

Instructions on how to remove the protective label from the remote control.

List of Commands

Surveillance Function

Explains standby mode with active sensors and automatic response to humidity.

Automatic Mode

Describes automatic operation controlled by active sensors like twilight and hygrostat.

Speed Selection

Details how to manually select operating speed for air exchange.

Humidity Threshold Selection

Allows adjustment of the hygrostat trigger point for automatic humidity control.

Airflow Direction Control

Allows setting airflow direction for units working in pairs or coupled.

Air Intake Function

Activates the product to draw air from the room.

Air Extraction Function

Activates the product to expel air from the room.

Filter Alarm Reset Procedure

Procedure to reset the filter usage counter after maintenance.

Product Reset Procedure

Details the procedure to restore the product to its original factory configuration.

Remote Control Battery Replacement

Product Maintenance

Maintenance Period Indication

Provides guidance on when to perform cleaning and filter replacement.

Cleaning Filters and Heat Exchanger

Instructions on how to clean the product's filters and ceramic heat exchanger.

Cleaning Damper and Impeller

Details on cleaning the damper and the impeller blades of the main unit.

Re-service After Cleaning

Steps to reassemble and restart the product after maintenance.

Correct Operation Instructions

Troubleshooting and Support

Technical Assistance Information

Guidance on what to do if the product fails to operate or behaves abnormally.

Disposal and Recycling Guidelines

Information on environmentally responsible disposal and recycling of the product.

S&P RESPIRO Series Specifications

General IconGeneral
TypeAxial Fan
Frequency50/60 Hz
MountingWall
Protection ClassII
Insulation ClassB

Related product manuals