To Next Page

To Previous Page

INSTALLATION

Location

When selecting a position for your unit make sure the floor is flat and firm, and that the room is well

ventilated with an average room temperature of between 16°C and 32°C. Avoid locating your unit near

a heat source, e.g. a cooker, boiler or radiator. Avoid direct sunlight. If you are placing your unit in an

outbuilding such as a garage or annex ensure that the unit is placed above the damp course, otherwise

condensation will occur on the cabinet. Never place the unit in a wall recess or into fitted cabinets or

furniture.

When installing the unit, ensure that 2 cm of free space is left at both sides and 3 cm at the rear of the

unit. The door can open to the right or the left, depending on what better suits the location. Please

ensure there is adequate space for the door to fully open.

• If you want to have the door swing reversed, we recommend that you contact a qualified

technician. You should only try to reverse the door yourself if you believe that you are qualified

to do so.

Installation

Ensuring Optimum Performance of Your Appliance

Please note that to ensure optimum performance of your appliance, sufficient ventilation must be

provided to allow heat from the appliance to escape.

x cm

x cm = sufficient ventilation

space required for

optimum performance.

If the appliance is placed under a continuous worktop, the appliance lid (if applicable) may be

removed

and a ventilation grille of at least 200 cm

(available from DIY shops or specialist retailers)

should be installed

to the worktop above the rear of the appliance to increase ventilation.

min. 200 cm

Benets of Increased Ventilation

• Loweredpowerconsumption   •Improvedcoolingperformance

• Reducerunningcosts    •Prolongproductlifespan

SWC32B11E_7L_IB_130521_Shaun.indb 22 21/05/2013 12:19 PM

Sandstrom SWC32B11E User Manual

Questions and Answers: