EasyManuals Logo

Sandstrom SWC32B11E User Manual

Sandstrom SWC32B11E
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
GB
Filling Water into Humidier
1. Pull out the water tank of the humidifier.
2. Use a bottle to fill water into the water tank to the Max level.
3. Remember to fill with water every 6 days (depending on the actual humidity in your wine cooler).
Noises Inside the Wine Cooler
You may notice that your wine cooler makes some unusual noises. These noises are perfectly normal,
and are caused by the circulation of the refrigerant liquid in the cooling system. It has become more
pronounced since the introduction of CFC free gases. This is not a fault and will not affect the performance
of your wine cooler.
This is the compressor motor working, as it pumps the refrigerant around the system.
Stacking the Wine Bottles
The shelf system has been designed so that a range of
shelf heights can be selected. All the shelves can be
adjusted. There is also a bottle rack at the bottom of
the wine cooler.
When placing the bottles into the wine coolers, make
sure there is no contact with the back inner surface.
Max Capacity : 32 bottles
°C
°F
RUN LOWER
CHAMBER
°C
°C/°F POWER
°F
CHAMBER
Max
Low
x3x3
x3
x3
SWC32B11E_7L_IB_130521_Shaun.indb 28 21/05/2013 12:19 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sandstrom SWC32B11E and is the answer not in the manual?

Sandstrom SWC32B11E Specifications

General IconGeneral
BrandSandstrom
ModelSWC32B11E
CategoryWine Cooler
LanguageEnglish

Related product manuals