23
GB
INSTALLATION
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on
something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner.
Should you wish to move the unit to another location
and reverse the door, see the “Reversing the Door
Swing” Section.
Do not over tighten the screws as you may damage
the glass door.
Installing the Door Handle
1. Remove the 2 decorated caps on the left hand side of the
front of the glass door.
2. Position the door handle over the 2 screw holes.
3. Using a screwdriver and the supplied screws carefully
screw the door handle to the glass door.
Decorated Caps
SWC32B11E_7L_IB_130521_Shaun.indb 23 21/05/2013 12:19 PM
To Next Page
Loading...
Need help?
General
