S&T embedded FLATMAN ECO - DP Connector; DB15 VGA Connector; Option: COM1 RS-232;422;485 (Via Internal Cable Connection to ECX-Board); Option: COM2 RS-232;422;485 (Via Internal Cable Connection to ECX-Board)

FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
29
9.10 DP Connector
Pin Signal Pin Signal
1 TX0+ 11 GND
2 GND 12 TX3-
3 TX0- 13 GND
4 TX1+ 14 GND
5 GND 15 AUX+
6 TX1- 16 GND
7 TX2+ 17 AUX-
8 GND 18 HPD
9 TX2- 19 GND
10 TX3+ 20 PWR
fig. 33: Display Port connector
9.11 DB15 VGA Connector
Pin Signal Name Pin Signal Name
1 Red 2 Green
3 Blue 4 n.c.
5 GND 6 GND
7 GND 8 GND
9 VCC 10 GND
11 n.c. 12 DDC Data
13 Hsync 14 Vsync
15 DDC Clock
fig. 34: VGA connector
9.12 Option: COM1 RS-232/422/485 (via internal cable connection to ECX-Board)
9.13 Option: COM2 RS-232/422/485 (via internal cable connection to ECX-Board)
Pin RS-232 RS-422
Half Duplex
RS-485
Full Duplex
RS-485
1
DCD Tx- DATA- Tx-
2
RxD Tx+ DATA+ Tx-
3
TxD Rx+ - Rx+
4
DTR Rx- - Rx-
5
GND GND GND GND
6
DSR - - -
7
RTS - - -
8
CTS - - -
9
RI - - -
fig. 35: COM (RS232) connector