17
Stereo/Mono setting – FM
Your radio will play stereo broadcasts in stereo so long as the
received signal is of adequate strength. However, as a stereo signal
becomes weaker, the audio signal will become poorer. It may be
preferable to force the radio to play the station in mono in order to
reduce the level of audio noise.
1. Press the On/Off button to switch on your radio.
2. Tune to the required FM radio station as previously described.
3. Press in and hold down the Select button until the display
shows "Switch to Mono/Auto".
Note: your radio default is Auto.
To Next Page
Loading...
