MEMORY TUNING
RECALL A STATION FROM PRESET MEMORY
SLEEP FUNCTION (AUTO SHUT-OFF)
LIGHT
10
There are 5 memory presets for each waveband.
(1) Tune to the desired frequency or channel using one of the
previously described tuning methods.
(2) Press any desired PRESET button and hold down for 2
seconds.
The Display will show the preset number and M will flash and
stop with a beep sound indicating the radio station has been
stored.
(1) Select the required waveband.
(2) Press any of the PRESET button you required for.
The radio will instantly tune to the station and the Display will
show its frequency and memory location.
Press Sleep button, the indicator and 90 minutes
appear on the display, keep pressing the button until the desired
sleep time from 90 to 15 minutes appears on the display.
Release button whenever the sleep time shown on the
display is acceptable to you.
To cancel the sleep function, simply press Power On/Off button.
If the radio is operated by Ac power as long as the radio is
turned on, the display illumination will be always on unless you
press the LIGHT button to turn it off.
However if you use batteries as radio power,whenever you
need display illumination,press LIGHT button.Illumination will
turn off automatically 2 minutes after radio operations are
completed or you may turn it off by pressing the LIGHT button.
To Next Page
Loading...
