EasyManua.ls Logo

Sangean PR-D3L - Lock Switch; Reset Button

Sangean PR-D3L
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The lock switch is used to prevent unintentional operation,
(1) Set the LOCK switch to ON position the symbol will
appear on the display.The POWER and all the other buttons
will be disabled.
(2) To release the LOCK switch,move the switch to OFF position,
the LOCK symbol will be removed from the display.
Earphone for use with the radio should be stereo or mono with a
3.5 mm jack plug.Insert the headphone plug into the earphone
jack,the loudspeaker is automatically disconnected.
Note:This radio is a mono type receiver,even receiving a stereo
Station with stereo earphones can not produce stereo
Sound.
If the radio fails to operate correctly or some digits on the display
are missing or incomplete,you may use a suitable implement(
the end of a paper clip or pen),press the RESET button located
at the bottom of the unit.This will reset the microprocessor,clock
time and clear all the stations stored in the preset memory.
FM band 87.50 - 108 MHz
MW band 522 -1710 KHz
LW band 144- 279 Khz
LOCK SWITCH
EARPHONES JACK
RESET BUTTON
SPECIFICATIONS
FREQUENCY COVERAGE
11
All manuals and user guides at all-guides.com
all-guides.com

Other manuals for Sangean PR-D3L

Related product manuals