5
Fire, explosion and high pressure hazards
To minimize the risk of serious injury, death or property damage while using the Perform-Max Feeder:
a Read, understand and follow all instructions and safety precautions in the manual, and on this Perform-Max Feeder and on any label
for chemicals used with this Perform-Max Feeder.
DANGER
a Never use fast dissolving chlorine tablets, liquid bleach, or calcium hypochlorite in the Perform-Max Feeder.
a Never mix Trichlor chlorine tablets with Calcium Hypochlorite, or with any other form of concentrated chlorine or other chemicals.
a Never add any other types of chlorine, pH adjusters, shock treatments or algaecides through the skimmer.
These products should be added directly into the pool if required.
a
Do not contaminate the Perform-Max Feeder with dirt, organic matter, pool chemicals (such as calcium hypochlorite or pool shocks),
fertilizers or other household chemicals. Contact between any of these substances and the Perform-Max Feeder will result in a chemical
reaction with the generation of heat, liberation of hazardous gasses and re or explosion.
WARNING
a Use only slow dissolving trichlor tablets or pucks or bromine tablets in the Perform-Max Feeder.
a To prevent the build up of gas pressure in the Perform-Max Feeder, be sure the pool return line valves are open –
except when opening or servicing the unit.
a Do not inhale fumes from the Perform-Max Feeder.
a Avoid sparks, smoking, or any open ame near Perform-Max Feeder or chemicals.
a Do not exceed maximum operating pressure of 50 psi or maximum temperature of 104
º
F.
a Do not remove the cap while under pressure. Always turn off pump and bleed off pressure before opening Perform-Max Feeder.
a Do not install automatic or fast shut off valves downstream of Perform-Max Feeder.
a Always install the Perform-Max Feeder AFTER a heater (if applicable) on the return line.
a Always install any additional sanitizing equipment AFTER and NEVER BEFORE the Perform-Max Feeder is installed on the return line.
a Do not permit children to use or climb on this product. This product must be positioned to prevent children from using it as a
means of access to the pool.
a Always stand clear of the Perform-Max Feeder during pump start-up.
a Replace Perform-Max Feeder if you see signs of cracks, damage or degradation to the Perform-Max Feeder body or cap.
NOTICE
a Prior to pressurizing, check with your dealer to ensure your plumbing connections meet building codes.
a Failure to properly winterize your Perform-Max Feeder could result in freeze damage. (See page 18 for winterizing details.)
Review this label before installing or operating this Feeder. Contact King Technology at 800-222-0169 if this label is missing from your Perform-Max.
Safety Label on Perform-Max Feeder
To Next Page
Loading...