SANKI MFC-S3B-F - Page 32

30 / 32
16. Specifications
Model
MFC-S3B-F
MFC-S6B-F
Input
Voltage
AC100～120V±10%
AC200～240V±10%
Frequency
50/60Hz
Number of phases
Single phase
Output
Control method
Sine wave PWM method
Maximum current
3A
6A
Voltage
＊(1)
AC0～95V (Input power 100V system)
AC0～190V (Input power 200V system)
Frequency
40～400Hz
Operation
mode
Constant-voltage mode
Constant-voltage control with the set frequency
Constant-amplitude mode
Constant-amplitude control with the set frequency
Vibration sensor (Accessory)
KS-3 (used for the constant-amplitude control)
Added
function
Operation and stop
Operation and stop enabled according to external signal (contact
or 24VDC)
Overflow sensor input
NPN open collector sensor connection enabled
Operation signal output
No-voltage contact and NPN open collector
Speed change
Operation pattern change according to the external signal
Others
Soft start, soft stop, output voltage limit setting , short-circuit
protection, etc.
Power outlet
24VDC, 160mA
Operating temperature range
0 - 40℃
Operating humidity range
30 - 90% (no condensation)
Place of use
Indoor (no corrosive gas, dust or the like)
Noise resistance
1000Vp or more
Mass
1.1kg
1.3kg
Applicable
vibrator
Bowl feeder
Full-wave
JA-C230,JA-C300
CA-150,CA-190
CA-230,CA-300
JA-C390N,JA-C460N
CA-390,CA-460
Half-wave
JA-C390NH,JA-C460NH
JA-C610H,JA-C700H
Inline feeder
Full-wave
CS-1,CS-2
Half-wave
CS-L350AG
*(1) The output voltage varies according to the input voltage.