Sanlien Palert - PARAMETERS DESCRIPTION; EARLY WARNING PARAMETERS

USER MANUAL
Version 2 17/11/2017
© Jenlogix 2017 Jenlogix
Page 17 of 40
PD_WARNING_THRESHOLD
P-wave Pd displacement (cm) Warning threshold
Default 0.35
PGA_TRIG_ENABLE
Use PGA to trigger event YES / NO
PGA_WATCH_THRESHOLD
PGA (gal) watch threshold
PGA_WARNING_THRESHOLD
PGA (gal) warning threshold
PGA_ACTION_THRESHOLD
PGA (gal) action threshold
STA_LTA_TRIG_ENABLE
Use STA / LTA to trigger event YES / NO.
STA_WIDTH
STA Time window (seconds)
LTA_WIDTH
Stop threshold of STA/LTA (seconds)
STA_LTA_THRESHOLD
STA / LTA ration trigger threshold.
STA_LTA_STOP_THRESHOLD
Time window of LTA (seconds)
STA_LTA_EVENT_TIME
STA / LTA trigger duration (seconds)
STA_LTA_RELAY1
RELAY1 Threshold unit: gal
STA_LTA_RELAY2
RELAY2 Threshold unit: gal
STA_LTA_RELAY3
RELAY3 Threshold unit: gal
S3_MODE
NO
AUTO_OFFSET
Use this function to move the moving average to
zero or not. YES/NO
INSTALLATION_ANGLE
Mounting angle correction from north 0 Clockwise
is positive.
INT_BATTERY_LOW_TH
Internal battery threshold: Default 3.5v
RTC_BATTERY_LOW_TH
Real Time Clock Battery threshold: Default 2.0v
EXT_POWER_LOW_TH
External Power threshold: Default 10 V