Sanlien Palert - N OUT OF M SETTING

USER MANUAL
Version 2 17/11/2017
© Jenlogix 2017 Jenlogix
Page 23 of 40
3.11.5 VOICE ALARM AND EVENT RECORD
(Voice alarm is not supported at present)
When the current threshold is met or a regional early warning is triggered, the system will start a
voice alarm playback. The threshold for the event to be recorded can be adjusted. Different voice
alerts will be triggered depending on the daytime / night time settings as follows.
DAY BEGIN MINUTE
Daytime start minute (420/60 = 7am).
DAY END MINUTE
Night starting time (1380/60 = 23 or 11pm).
EEWS DAY VOICE INTENSITY
Regional Day speech warning alert intensity
threshold.
EEWS NIGHT VOICE INTENSITY
Regional warning voice alerts night intensity
threshold.
DAY VOICEALARM-INTENSITY
Day voice alarm warning threshold intensity.
NIGHT VOICEALARM-INTENSITY
Night voice alarm warning threshold intensity.
VOICEALARM PLAY NUMBER
Number of times Voice broadcast repeats.
RECORD-INTENSITY
Start of recording seismic intensity threshold.
PRE-EVENT SECOND
The length of time before an incident that the data
is stored.
POST-EVENT SECOND
The amount of time after the incident that the data
is stored.
EVENT FILE MAX LENGTH IN SECOND
Longest time event is recoded. If not set, the
default is 60 seconds.