Sanlien Palert - OTHER PARAMETERS

USER MANUAL
Version 2 17/11/2017
© Jenlogix 2017 Jenlogix
Page 22 of 40
3.11.4 REGIONAL WARNING SETTING
Parameters for regional early warning, used by Earthquake Early Warning System (EEWS) and
shake map central system, are as follows:
LOCAL_LONGITUDE
Longitude Unit: degrees
LOCAL_LATITUDE
Latitude of Unit: degrees
HEIGHT
Elevation of Unit: degrees
SITE EFFECT
To handle the site/geophysics effect.
This is a number that is generated from historic data and
defaults to 1.931. It should not normally be changed.
EEWS SERVERS IP
EEWS Server IP address.
EEWS RELAY1 INTENSITY
Relay 1 trigger intensity threshold.
EEWS RELAY2 INTENSITY
Relay 2 trigger intensity threshold.
EEWS RELAY3 INTENSITY
Relay 3 trigger intensity threshold.
EEWS_HOLD_SECONDS
Keep alarm status after countdown