Need help?Do you have a question about the Sansui AU-X701 and is the answer not in the manual?
General| Damping Factor | 100 |
|---|---|
| Total Harmonic Distortion (THD) | 0.003% |
| Frequency Response | 0Hz-300kHz |
| Input Sensitivity | 2.5 mV (MC) |
| Output | Pre out |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 90dB (MM), 74dB (MC) |
Covers power plug handling, case removal, ventilation, installation, and cleaning safety measures.
Instructions for setting the correct voltage before connecting the power plug to prevent hazards.
Essential guidelines and warnings for making proper audio connections to the amplifier.
Details on connecting speaker systems A and B, including impedance considerations.
How to connect turntables, CD players, tuners, and components via LINE terminals.
Instructions for connecting tape decks, DAT, and PCM audio processors.
Information on using the unit's AC outlets for powering external components.
Guidance for connecting graphic equalizers or sound processors via SEND/RETURN terminals.
Explanation of the power switch, protector indicator, and input selector controls.
Details on tone, subsonic, muting, and volume controls for adjusting sound output.
How to activate and deactivate speaker systems A and B for listening.
Instructions for using TAPE/DAT switches and the REC SELECTOR for recording.
Explanation of tone controls, source direct, loudness, balance, processor, and MM/MC switches.
Information about connecting headphones for private listening.
Steps for setting controls before operation and playing various program sources.
Instructions for recording audio onto tape decks and dubbing content between tape decks.
To Next Page
