Need help?Do you have a question about the Sansui G-5700 and is the answer not in the manual?
General| Power Output | 75 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.03% |
| Tuning Range | FM, MW |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Signal to Noise Ratio | 95dB (line) |
| Speaker Load Impedance | 8Ω to 16Ω |
Guidance for proper placement, connection, and airflow guidelines to prevent hazards.
Instructions for correctly connecting components and cables to prevent issues.
Details on setting up indoor and outdoor FM antennas for best reception.
Instructions for aligning the rear-panel bar antenna for optimal AM reception.
How to connect speaker cords to SPEAKER SYSTEM-A or B terminals.
Connecting your turntable to PHONO or TAPE/AUX inputs, including grounding.
Guide for connecting tape decks to the unit's TAPE REC and TAPE PLAY terminals.
Instructions for connecting a Dolby NR adaptor for playing Dolbyized tapes or broadcasts.
Explanation of POWER, SPEAKERS, SELECTOR, PHONES jack, and TAPE/AUX inputs.
Using the TUNING control and understanding SIGNAL/TUNE indicators.
Function of the FM MUTING switch to reduce inter-station noise.
How to use TAPE MONITOR switches for playback and recording monitoring.
Understanding the PEAK POWER LEVEL indicator for volume output.
Adjusting overall volume and using the AUDIO MUTING function for temporary reduction.
Switching between STEREO/MONO modes and adjusting speaker balance.
Connecting a microphone and adjusting its input level with the MIC MIXING control.
Using LOUDNESS, TONE, BASS, and TREBLE controls for sound shaping.
Activating the SUBSONIC FILTER to reduce low-frequency noise from records.
Steps for correctly adjusting controls and switches before powering on the unit.
Steps for selecting PHONO and playing vinyl records, including troubleshooting.
How to select FM AUTO or AM and tune for optimal reception, including Dolby broadcasts.
Instructions for playing tapes, recording, and handling quality issues.
Connecting a microphone, mixing audio, and preventing howling.
Tips for better FM reception, including multi-path phenomenon and antenna alignment.
Advice for better AM reception, addressing weak stations and noise issues.
Explanation of auxiliary inputs and their use for tape decks and adaptors.
Information on the unit's protection circuit and actions to take if it activates.
Technical details on power output, distortion, frequency response, and input sensitivity.
Tuning range, sensitivity, selectivity, and distortion for FM and AM tuner sections.
Power requirements, dimensions, weight, and other technical details of the unit.
To Next Page
