Need help?Do you have a question about the Sansui G-9000 and is the answer not in the manual?
Guidelines for proper placement, ventilation, and avoiding environmental hazards.
Advice on using soft cloths and avoiding solvents for cleaning the unit.
Connecting the unit to power and external speakers, including impedance.
Connecting antennas and various audio sources like turntables and tape decks.
Explanation of power switch, indicators, and speaker selection.
Description of selector, meter, and tape monitor functions.
Using tuning controls, mode selection, FM muting, and volume.
Adjusting tone, using filters, and connecting a microphone.
Steps to follow before operating the unit for the first time.
Guidance on playing records, radio, and tapes.
Instructions for tape copying and microphone usage.
Separating and using the preamplifier and power amplifier sections.
Tips for better FM and AM radio reception, antenna alignment.
Connecting external equipment via AUX inputs and using adaptors.
Technical details on power output, distortion, frequency response, and inputs.
Technical performance metrics for the FM and AM tuner sections.
General| Power Output | 160 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 5Hz to 50kHz |
| Total Harmonic Distortion | 0.03% |
| Input Sensitivity | 2.5mV (MM), 150mV (DIN), 150mV (line) |
| Tuning Range | FM, MW |
| Speaker Load Impedance | 8Ω to 16Ω |
| Year Introduced | 1978 |
| Output | 150mV (line) |
| Channel Separation | 50dB (MM), 50dB (line) |
To Next Page
