Sansui VCR4510D - Setting the Timer Recording

40
POWER
EJECT
TV/VCR
COUNTER RESET
INPUT SELECT
REC/OTR
SLOW
SPEED
MENU
–+
–
+
SET
SKIP
SEARCH
–+
TRACKING
AUTO
CANCEL
ENTER
STOP
PLAY
F.FWD
REW
TIMER REC
PAUSE/STILL
CHANNEL
CALL
1
2
3
456
78
0
9
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
Turn on the TV and set to the video channel 3 or 4.
Press the TV/VCR selector button to select the VCR
mode.
Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
Check that the clock and date are correct (see page
25).
•
•
•
•
CHECK BEFORE YOU BEGIN
Press the MENU button. Check the TIMER REC
SET option is selected, then press the ENTER
button.
2
Press the SET + or – button to select one of
the program lines, then press the ENTER
button.
SETTING THE TIMER RECORDING
MENU
CLOCK SET
TIMER REC SET
ON OFF
AUTO REPEAT
CH SET UP
〈+/–/ENTER/MENU〉
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
---
-:--
-:--
-:--
-:--
---
-:--
-:-- ---
-:-- -:-- ---
-:-- -:-- ---
-:-- -:-- ---
-:-- -:-- ---
-:-- -:-- ---
------ -
------ -
------
------
-
-
------ -
------ -
------ -
------ -
〈 +/-/ENTER/CANCEL/MENU 〉
START END
DATE
CH
ENTER
MENU
–+ SET
ENTER
–+ SET
ENTER
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1. (Tape speed: SLP)
3
Press the SET + or – button to select the date,
then press the ENTER button.
1
32
321
1
To record from external source set the channel to "L". "L" will appear next to ch 125 (or 69).
NOTE:
---
-:--
-:--
-:--
-:--
---
-:--
-:-- ---
-:-- -:-- ---
-:-- -:-- ---
-:-- -:-- ---
-:-- -:-- ---
-:-- -:-- ---
------ -
------ -
------ -
-
------ -
------ -
------ -
------ -
26(WE)
〈 +/-/ENTER/CANCEL/MENU 〉
START END
DATE
CH
4C83101A(P36-41) 9*9*99, 10:3440