To Next PageTo Next Page
Need help?Do you have a question about the Sansui VHF6010 and is the answer not in the manual?
General| power source | 120V, 60Hz |
|---|---|
| power consumption | Approx. 11 watts |
| rf channel output | 181 Channel Freq. Synthesized |
| in (rca) | 1Vp-p 75 ohm, –8dB/50K ohm |
| out (rca) | 1Vp-p 75 ohm, –8dB/1K ohm |
| vhf/uhf in | 75 ohm coaxial |
| vhf/uhf out | 75 ohm coaxial |
| hi-fi frequency response | 20Hz to 20, 000Hz |
| hi-fi dynamic range | More than 90dB |
| f.fwd/rew time | Approx. 1 min. 48 sec. (with T-120 Cassette Tape) |
| speed search | SP - 3 & 5 X Normal Speed, LP - 7 & 9 X Normal Speed, SLP - 9 & 15 X Normal Speed |
Weight and Dimensions| dimensions | 14-3/16"W X 3-3/4"H X 9-7/16"D |
|---|---|
| weight | 8.8 Ibs |
Three common methods for connecting the VCR output to a TV using coaxial cable.
How to set the VCR's 3/4 channel selector and the TV to the same channel for viewing.
Step-by-step process to set the month, day, year, and time for accurate timer recordings.
Using the menu to choose between TV and CATV channel reception settings.
Steps to start the automatic channel search and memory process.
Procedures for adding new channels or removing unwanted ones from the channel list.
How to properly insert a tape, including automatic power on and play features.
Procedures for ejecting a tape, including automatic eject features.
Loading a tape and pressing the PLAY button to begin playback.
Using the STOP button to halt playback while keeping the tape loaded.
Steps to enable the AUTO REPEAT function for continuous playback.
Loading a tape and setting the VCR/TV to the correct channels for recording.
Choosing the recording tape speed and selecting the desired TV channel.
Using the REC/OTR and STOP buttons to end a recording session.
Using the PAUSE/STILL button to pause recording without ending it.
Steps to start a timed recording using the REC/OTR button and selecting duration.
Setting the date, start time, end time, channel, and tape speed for timer recordings.
Options for setting recurring daily or weekly timer recordings.
Procedures for modifying or correcting previously entered timer recording settings.
Steps to remove a programmed timer recording.
Steps to set the counter and use the ZERO RETURN button for tape positioning.
Using the INDEX button and search controls to find recorded points on the tape.
How to record MTS STEREO TV broadcasts for high-fidelity sound.
How to connect the VCR to another device for dubbing tapes.
Steps to start the recording and playback process for copying tapes.
