Santint A4b - Page 18

A4b Automatic Dispenser V1.0 16
Error Code
Cause
Action
E11
Emergency button is pressed
Release emergency button
E12
Cover is open
Cover micro switch is broken。
Close cover
Change micro switch
E18
No base paint can
Base paint can is too far away from
sensor
Sensor is broken
Put base paint can
Push base paint can close
Adjust or change bas paint can sensor
E31
Valve motor is broken
Vale motor driver is broken
Right valve sensor too far away
Right valve sensor is broken
Change valve motor
Change motor driving board
Close sensor
Change sensor
E32
Stepping motor is broken
Stepping motor driver is broken
Original position sensor for lifting block
is too far away.
Original position sensor for lifting block
is broke
Change Stepping motor
Change motor driving board
Close sensor
Change sensor
E34
Canister position sensor too far away
Canister position sensor is broken
Adjust the sensor
Change the sensor
E35
Turning table motor broken turning Plate
don’t move
Turing table driver broken
Canister code sensor broken
Change turning table motor。
Change driving board
Change code sensor
E36
Counting magnet is in wrong position
Canister code sensor broken
Put magnet in right position
Change code sensor
E37
Canister position error
Canister position sensor too far away
Canister position sensor is broken
Turntable moves.
No canister found
Closer sensor
E38
Piston rod is lifted
Piston head sensor too far away
Put the piston rod back
Closer sensor
E39
Turning table move while stepping motor
and valve not in home position 。
Check Valve is in home position
Stepping motor home sensor is lighted
E41
Valve motor is broken
Vale motor driver is broken
Left valve sensor too far away
Left valve sensor is broken
Change valve motor
Change motor driving board
Close sensor
Change sensor
Contact the supplier for other issue(s). Get the model and serial number of the machine prepared.