A4b Automatic Dispenser V1.0 7
mainframe.
Insert the serial port line or the USB wire into the socket of the machine. Now the computer is
installed. See 5.2.1.
5.3 Software
1. Turn on the switch on the back of machine:
2. Turn on monitor and mainframe, enter Windows system;
3. Insert the U flash disk equipped with the machine into the USB port of the computer.;
See Software Manual for detail info about installation and using.
6. Machine Adjustment
The machine has been tested before leaving factory. Normally the professional goes to your site to do machine
adjustment. If you don’t need it, please install and adjust the machine under the guidance of the professional.
6.1 Software
1. Turn on the switch on the back of machine, and ensure that the Emergency
Stop button is on (If equips uninterruptible power supply, please ensure that
the power supply is on.)
2. Open (double-click the icon) Color Expert 2.0 program；
3. Machine begins to initialize, and pop up the interface shown in 6.1.1. If there is abnormal sound coming
from the machine, press emergency button and start troubleshooting.
1、如图所示，将左侧立板用
两个六角螺栓 M8×20、两个垫圈
8 通过底板固定到底梁上。
2、如图所示，区分小桶架板
总成、大桶架板总成、顶层架板总
成。
To Next Page
Loading...
