What to do if Santint Paint Sprayer LCD displays 'Emergency Button Pressed'?
If the LCD displays 'Emergency Button Pressed', it may be because the emergency stop button is pressed. In this case, release it. If the issue persists, the emergency stop may be defective, or its connection wire is broken, so replace it or connect the wire.
Why Santint S5 Paint Sprayer has extreme vibrations and noises during shaking?
Extreme vibrations and noises during shaking can occur if the machine is not leveled, so adjust the feet to level it. It can also happen due to deformation of the paint can, so replace it. Finally, check if the machine is overloaded and reduce the load if necessary.
What to do if Santint S5 Paint Sprayer LCD displays 'Door Open'?
If the Santint Paint Sprayer LCD displays 'Door Open', first ensure that the door is fully closed. If the problem continues, the electric mortise lock may be faulty, and you should replace it.
What to do if Santint S5 Paint Sprayer LCD shows 'Motor Overheat'?
If the LCD shows 'Motor Overheat', the shaker might be working under improper voltage for too long. Power off the machine to let it cool down and restart it after one hour. Consider installing a voltage stabilizer. If the problem occurs frequently, have the electrical circuit checked.
Why Santint S5 Paint Sprayer is not shaking while the clamping system works well?
If there's no shaking while the clamping system works well, the AC motor capacitor might be faulty, so replace it. Alternatively, the AC motor itself could be in trouble, requiring replacement.
Why Santint S5 Paint Sprayer cannot shake big container?
If the Santint Paint Sprayer cannot shake a big container, the V-belt might be loose. Try to tension it.
What to do if Santint S5 Paint Sprayer LCD displays 'Clamping System Trouble'?
If the LCD displays 'Clamping System Trouble', the DC motor wire could be faulty, so replace it. It could also be a circuit board issue, in which case, replace the circuit board.
What to do if Santint S5 Paint Sprayer LCD displays 'Initializing' right after the AC motor is started?
If the LCD displays 'Initializing' right after starting the AC motor, the wiring for the mains power supply may be too thin. Replace the wiring with a thicker one or install a voltage stabilizer.
What to do if Santint S5 Paint Sprayer DC motor stops working and LCD displays 'Clamping System Trouble'?
If the DC motor stops working after a few rotations and the LCD shows 'Clamping System Trouble', the magnetic switch wire may be faulty, so replace it. It's also possible that the magnetic switch itself is defective, requiring replacement.
What to do if Santint S5 Paint Sprayer is clamping, LCD displays 'Shaking' but shaking cannot proceed?
If, after clamping, the LCD displays 'Shaking,' the main motor makes noises, and time-counting is on, but shaking doesn't happen, the starting capacitor may be damaged. Try changing the position of the switch on the capacitor union.
Provides essential safety warnings, including electrical shock hazards, proper ventilation, and usage restrictions.
Identifies key parts of the shaker, such as the LCD, control panel, viewing door, and clamping plate.
Explains the meaning of various labels on the machine, including load limits and warning symbols.
Details the control panel functions, including start, stop, and timer buttons, and emergency stop.
Step-by-step guide for switching on, loading, selecting time, and unloading the shaker, including cleaning.
Schedule for lubricating machine parts, specifying intervals for guide pillars, screws, and other positions.
Lists common operational issues, their causes, and recommended solutions for the automatic shaker.
General| Brand | Santint |
|---|---|
| Model | S5 |
| Category | Paint Sprayer |
| Language | English |
To Next Page