Santon Aquaheat SS V 100 User Manual

Installation and User Instructions
Aquaheat Unvented Water Heaters
Models: SS V 50/80 & 100
Please read and understand these instructions before starting work.
Please leave this leaet with the user following installation.
PACK CONTENTS
Heater, Installation & User Instructions.
WARNING
This water heater must only be installed by qualied persons.

Santon Aquaheat SS V 100 Specifications

General

Model	Aquaheat SS V 100
Type	Storage Water Heater
Capacity	100 Liters
Power Rating	3 kW
Voltage	230 V
Frequency	50 Hz
Material	Stainless Steel
Thermostat	Adjustable
Weight	25 kg
Mounting	Wall-mounted
Safety Features	Pressure Relief Valve, Thermal Cut-out

Summary

1.0 Introduction

1.1 Important Installation Points

Key points for installation and user safety.

1.2 Pack Contents

List of components included in the installation kit.

2.0 Technical Specifications

Performance Data

Details on heat-up time, recovery, and heat loss.

3.0 Installation

3.1 Location

Instructions for selecting a suitable and safe location for the unit.

3.2 Plumbing

Details on connecting the water pipes to the heater.

3.3 Discharge

Requirements for safe disposal of water discharged from safety devices.

3.4 Electrical

Electrical connection requirements and wiring instructions.

4.0 Commissioning

4.1 Plumbing Checks

Plumbing checks and procedures during commissioning.

4.2 Electrical Checks

Electrical checks and procedures during commissioning.

5.0 Explanation to User

Important User Notes

Crucial warnings and advice for the user regarding safety and operation.

6.0 Maintenance

6.1 Descaling

Procedure for removing limescale build-up in hard water areas.

6.2 Safety Valves

How to check the Temperature/Pressure Relief and Expansion Relief valves.

6.3 Expansion Vessel Pressure

How to check and recharge the expansion vessel's pre-charge pressure.

7.0 Spare Parts

8.0 Fault Finding

9.0 Accessories

10.0 Guarantee

11.0 Environmental Information

12.0 Spares Stockists