Operation:
The mixer must always operate with a minimum of liquid in the jar in order to drive solid
foods towards the blades.
Maximum speed with rotary switch: 15,000 rpm
Speed with PULSE button: 18,000 rpm
Stopping the appliance:
There are two ways to stop the appliance:
1. Turn the rotary switch (3) to "OFF" to stop the motor completely, then operate the
handle (2) to release the jar. Wait until the blades have stopped completely before
removing the jar from the base.
2. During operation at a set speed, push the handle (2) down to unlock the clamping rod
(1). This operation will stop the appliance without altering the speed adjustment.
Wait until the blades have stopped completely before removing the jar from the base.
Rotation speed:
The rotation speed of the blades must be adapted to the results desired and the type of
foodstuffs to be processed.
Mixing solid foods:
Dice up dry ingredients and insert them through the opening in the lid (7) when the
appliance is in operation.
Increase the size of the cubes according to the quantity of food already mixed or "puréed"
in the jar.
Ice:
Do not use the blades to crush blocks of ice.
Small ice cubes like those produced by the majority of automatic ice makers can be
crushed at low speed.
Making a mayonnaise:
Put all the ingredients in the jar except for the oil. During operation, remove the cap (8)
from the lid and add the oil a little at a time pouring it in evenly.
4080045-7-8-9 G20E 8/15
To Next Page
Loading...
