Santos 33 User Manual

SANTOS : Instruction and maintenance manual
98133 US 5.0 - 01 2013 1 / 19 www.santos.fr
USER AND MAINTENANCE MANUAL
IMPORTANT: documents included in this manual to be kept:
• "CE" COMPLIANCE DECLARATION
• WARRANTY CERTIFICATE
Translation of the original version
Coffee grinders - Fruit juicers - Mixers - Blenders - Drinks dispensers - Planetary mixers
Cheese graters - Ice crushers - Mincers - Vegetable slicers – Dough mixer
Moulins à café - Presse-fruits - Mixers - Blenders - Distributeurs de boissons - Batteurs
mélangeurs - Pétrin - Râpes à fromage - Broyeurs à glaçons - Hache-viande - Coupe-légumes
MODELES DEPOSES FRANCE ET INTERNATIONAL
INTERNATIONALLY PATENTED MODELS
SANTOS SAS :
140-150 AVENUE ROGER SALENGRO
69120 VAULX-EN-VELIN (LYON) - FRANCE
PHONE 33 (0) 472 37 35 29 -
FAX 33 (0) 478 26 58 21
E-Mail :santos@santos.fr www.santos.fr
BAR MIXER N°33 – N°33E
!

Santos 33 Specifications

General

Brand	Santos
Model	33
Category	Mixer
Language	English

Summary

"CE" COMPLIANCE DECLARATION

IMPORTANT SAFEGUARDS

INSTALLATION AND HANDLING

ELECTRICAL CONNECTION

Details on power supply voltage, line protection, and earthing requirements.

USING FOR THE 1st TIME

RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE

YOUR BAR MIXER N°33

Using the MIXER

Instructions and guidance on operating the bar mixer for various applications.

CLEANING

STORAGE

Recommendations for storing the mixer to prevent damage and ensure longevity.

MAINTENANCE

Spare parts

Information on ordering replacement parts, including required details.

Changing the coupling system

Step-by-step guide for replacing the drive or receiver coupling system.

Dismantling the drive part (motor)

Instructions on how to remove the motor's drive component.

Assembling the drive part (motor)

Instructions on how to install the motor's drive component.

Dismantling the receiver part (knives)

Guide on safely removing the knife assembly from the mixer.

Assembling the receiver part (knives)

Steps to reassemble the knife assembly onto the mixer.

TROUBLESHOOTING

The appliance does not start

Steps to diagnose why the appliance fails to power on.

The appliance stops following an overload

How to address the appliance shutting down due to motor overload.

The motor runs but the knives do not rotate

Steps to fix the issue where the motor operates but the blades do not spin.

TECHNICAL SPECIFICATIONS

Wiring Diagrams

Electrical schematics for different voltage and model configurations.

WARRANTY CERTIFICATE

APPLIANCE IDENTIFICATION PLATE