Santos 33 - MAINTENANCE; Spare parts; Changing the coupling system

SANTOS : Instruction and maintenance manual
98133 US 5.0 - 01 2013 10 / 19 www.santos.fr
If any intervention is necessary to replace parts subject to wear, such as the knives, the
electrical or other components, please refer to the parts lists (see the exploded view at the
end of this manual).
MAINTENANCE
Prior to carrying out any intervention on the appliance, it must be
disconnected from the mains without fail (10).
Spare parts:
This machine requires no particular maintenance because the bearings are lubricated for
life.
If any intervention is necessary to replace parts subject to wear, such as the knives, the
electrical or other components, please refer to the parts lists (see the exploded view at the
end of this manual)..
For all spare part orders state:
 the type,
 the machine serial number and
 the electrical specifications
recorded under the machine.
Changing the coupling system:
IMPORTANT: (Fig. D).
• The drive part (motor) (11) is made of flexible rubber.
• The receiver part (knives) (12) is made of hard plastic.
11
12
19
Fig D
!
!