IMPORTANT SAFEGUARDS
When using, cleaning or maintaining the machine, always follow these instructions:
Read the explanatory instructions in full
Keep this user manual
INSTALLATION AND HANDLING
Just one person is required for handling the appliance. For ease of use, it is
recommended that the machine is placed on a table or work surface so as to have the
dose measurer in front of you (recommended height: 90 cm, to be adapted to suit the
user).
IMPROPER USE
1. Do not use this appliance for grinding anything other than roasted coffee beans.
2. Never operate the appliance with no coffee beans in the bean container.
3. Remove from the coffee beans any foreign bodies which may damage the grinding
wheels (metal staples, stones, etc.).
4. The appliance should neither be cleaned in a jet of water nor with a high pressure
spray.
5. For electrocution risk protection reasons, never plunge the base into water or any
other liquid.
6. Unplug the appliance before carrying out any work on it: cleaning, maintenance or
repair.
7. The use of spare parts other than certified SANTOS original parts is prohibited.
8. Do not use the appliance if the power supply cord is damaged. It must be replaced
by either a SANTOS approved dealer or a person with similar qualifications to avoid
any danger.
9. It is forbidden to operate the appliance on a surface with a slope in excess of 10°
with respect to the horizontal plane. The feet of the machine must always be resting
on this surface. The machine motor shaft must always be vertical with respect to
the surface on which it is placed.
10. Connect several appliances to the same power socket.
11. Do not use the appliance outdoors.
12. Never place the appliance close to or on a source of heat.
To Next Page
Loading...