12
16
15
4X
17
STEP 2A (continued)
Install the four lag bolts
17
and firmly tighten until they are
pulled flush against the wall plate
16
.
Go to STEP 3 on PAGE 19.
6
REMOVE TEMPLATE
7
SECURELY TIGHTEN
Remove the wall plate template and discard.
All four lag bolts
17
MUST BE firmly tightened to prevent
unwanted movement of the wall plate
16
.
Ensure the wall plate is
securely fastened to the wall before continuing on to the next step.
CAUTION:
Avoid potential personal injury or property damage!
To Next Page
Loading...
