Sanus VML41 - Attach Wall Plate

7
2-3A Attach the Wall Plate
1
2
3
CAUTION: Improper use could reduce the holding power
of screws
21
. DO NOT over-tighten the screws.
Go to STEP 3 on PAGE 10.
17
17
2118 20
IMPORTANT: 3.2 mm (1/8 in.)
pilot holes must be drilled to a
depth of 63 mm (2.5 in.).
63 mm (2.5 in.)
3.2 mm
(1/8 in.)