Sanyo 2-WAY ECO-i SPW-KR74GXH56A - Monitoring Operations

3 - 9
W-2WAY ECO-i SYSTEM
Outdoor Unit Maintenance Remote Controller
3
4. Monitoring Operations
Display the indoor unit and outdoor unit sensor
temperatures.
<Operating procedure>
➀
Press and hold the (CHECK) button and
buttons simultaneously for 4 seconds or longer to
engage temperature monitor mode.
During temperature monitoring, is illuminates.
(The display and operations are the same as
for monitor mode using the indoor unit remote
controller.)
➁
Press the button and select the indoor unit
to monitor.
➂
Press the temperature setting and
buttons and select the item code of the temperature
to monitor.
The unit No. of the selected indoor unit, and the
temperature data, are displayed.
➃
To end monitoring, press the (CHECK) button.
The display returns to the normal display.
NOTE
The display does not blink.
1
4
2
3
W-2WAYECO-iSYSTEMEng3.indd9W-2WAYECO-iSYSTEMEng3.indd9 2008/09/0217:40:092008/09/0217:40:09