Sanyo CHDZ07263 - Page 31

2 - 11
Remote Control Functions
2. Wireless Remote Controller
1
2
3
4
5
6
7
8
Wireless remote
control unit
address displays
……
X type
Position of
address switch on
signal receiver
(inside indoor unit)
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
A, T types
Position of
address switch on
signal receiver
(inside indoor unit)
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
K type
Position of
address switch
inside indoor unit
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3,set the
knob upward (1); conversely, for 4,
5 and 6, set the knob downward
(ON).
U, D types
Position of
address switch in
signal receiver
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
*

Wireless remote control unit for XM type does not have the function of address switch.
SM830183-003WAYECO-i.indb11SM830183-003WAYECO-i.indb11 2010/03/0311:14:342010/03/0311:14:34