Sanyo DC-D9 - CD PLAY; CD Handling and Basic Playback; Programmed CD Playback

;:CD CHANGER OPERATION DESCRIPTION
c.
LOAD/UNLOAD FUNCTION
(1) The rotation of the LOADA-JNLOAD MOTOR rotates the LOADWNLOAD DRIVE GEAR (552) in the clockwise direction.
(2) The DRIVE GEAR and the gear portion of the TRAY mesh together and the TRAY moves backwards.
(3) The completion of TRAY movement causes the UP/DOWN MOTOR to operate and lower the TRAY HOLDER, putting the
unit to chucking stayus.
LOADIUNLOAD DRIVE GEAR
A-
(552)
-’-.1
---
Disc
\ . .- m“:’”
...
.....
....
A
%!=flL J’++ “~~;:’”’//::’’-’’’”
-.
.--~-.
\
-\\.
..
d.
OPEN/CLOSE MECHANISM
\-i .fi
(1)The rotation of the OPEN/CLOSE MOTOR
OPEN/CLOSE IDLER GEAR via the BELT and PULLEY,
and the RACK GEAR whitch is intermeshed with the
OPEN/CLOSE IDLER GEAR moves forward during “OPEN”,
backwards during “CLOSE”.
CLOSE END SwlTCH (SW 2)
OPEN / CLOSE RACK GEAR
OPEN/CLOSE LEVER
OPEN/CLOSE lDLER GEAR
OPEN/CLOSE IDLER PULLEY
TRAY GUIDE
TRAY
:-,-,:%-3---- --
OPENI CLOSE MOTOR
OPEN END SWITCH (SW 1)
-6-