EasyManua.ls Logo

Sanyo DC-DA280 - PRECAUTIONS; Environmental and Placement Warnings; Operational and Safety Guidelines; CONNECTIONS

Sanyo DC-DA280
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 1 -
General
Output power ......................... 4W x 2
(at 4 ohms, 10% distortion)
Outputs .................................. SPEAKERS : 4 ohms
PHONES : 8 - 32 ohms
Power requirements............... AC 240V, 50Hz(AU)
AC 220V, 60Hz(KR)
Power consumption ............... 21 W
Dimensions (W x H x D) ........ Approx. 150 x 230 x 205 mm
Weight.................................... Approx. 2.3 kg
Speaker system
Type ....................................... Full range bass reflex
Unit used................................ 10 cm cone type
Maximum
power-handling capacity ..... 8 W (peak)
Nominal impedance ............... 4 ohms
Dimensions (W x H x D) ........ Approx. 145 x 230 x 170 mm
Weight.................................... Approx. 1.2 kg (per speaker)
Specifications subject to change without notice.
SPECIFICATIONS
Tuner
Reception frequency
FM : 87.5 - 108.0 MHz
AM: 522 - 1710kHz (9 kHz step)
520 - 1710kHz (10 kHz step)
CD player
Channels................................ 2-channel stereo
Sampling frequency ............... 44.1 kHz
Pick-up ................................... Optical 3-beam
semiconductor laser
Laser output ........................... 0.6mW(Continuous wave max.)
Wave length ........................... 790 nm
Wow and Flutter ..................... Below measurable limits
Cassette deck
Track system ......................... 4-track, 2-channel stereo
Frequency response .............. 80 Hz - 15 kHz
Signal to noise ratio ............... 40 dB
Wow and Flutter ..................... 0.15% (WRMS)
Fast forward / Rewind time .... Approx. 110 sec. (C-60)
SYSTEM CONNECTIONS
FM aerial
AM loop aerial
Video/ Auxiliary equipment
L ch speaker
R ch speaker
To an AC outlet
WHAT TO DO IF
If the operation of the unit or display is not normal,
1. Disconect the mains lead.
2. Press the button on the unit for at least 30 seconds.
3. Connect the mains lead.
4. Operate the unit.

Other manuals for Sanyo DC-DA280

Related product manuals