CD CHANGER REPLACEMENT
1.
LOAD/UNLOAD FUNCTION
1.Remove the B TOP ENCOURAGE.
2. Remove the CD MECHANISM.
2.
HOW TO REMOVE THE TRAYS
1.Remove the CHUCK BRACKET.(O -~)
ER
RAGE
2. Rotate the UP/DOWN CAM GEAR and position the collar
3. Remove the three TRAYS through the gap at the back.
part of the TRAY HOLDER visible from the RIGHT SLIDE
TRAYASSY
at the
midpoint between the CHUCKING and TRAY.
RIGHT SIDE
DISCSTOPPER 8RA~KET
kti
1“
RIGHTSLIDE
1
0
u
o
CENTER
i
/
3. REPLACING THE TRAY GUIDE
● Have the LEFT TRAY GUIDE HOLDER and TRAY GUIDE ready before proceeding.
1. Turn the UP/DOWN CAM GEAR and remove the setscrew of the TRAY HOLDER from the hole in the GEAR BLOCK BRACKET.
2. Turn the UP/DOWN CAM GEAR counter-clockwise as far as it will go, and remove the SCREWS.
3.
4.
Remove the five set screws of the LEFT TRAY GUIDE
HOLDER, and remove it in the direction of the arrow.
When assembling the parts, align the TRAY SLIDE and UP/
DOWN DRIVE GEAR.
-6-
R
UPIOOWN
MARK
DRIVEGEAR
\
TRAYSLIDE
‘----U
HI@
To Next Page
Loading...
