Sanyo DC-F430AV - CD Changer Opration and Description

CD CHANGER OPERATION AND DESCRIPTION
4. When the TRAY closes and it reaches the tip of RIB part of LEFT TRAY GUIDE, the LOCK LEVER is lowered to release the
TRAY, and loading proceeds.
TRAYGUIOEHOLDER
LOCK LEVER
OPEN~ CLOSE
/
RiB
/
TRAY LOCK
TRAY RELEASE
(2) LOADING
1. The rotation of the LOAD/UNLOAD MOTOR rotates the LOAD/UNLOAD DRIVE GEAR in the clockwise direction.
2. The DRIVE GEAR and the gear portion of the TRAY mesh together and the TRAY movers backward.
3. The completion of TRAY movement causes the UP/DOWN MOTOR to operate and lower the TRAY HOLDER putting the unit to
chucking
TRAY
status.
4. The rotation of the UP/DOWN MOTOR rotates the UP/
DOWN GEAR in the counter-clockwise direction. In
connection with this, the TRAY HOLDER SLIDE moves
forward, and at the same time, the RIGHT SLIDE is moved
backwards by the SYNCHRO LEVER.
LEFT
RIGHTSLIDEBRACKET ‘
R
2V
L LOAO/UNLOAO DRIVE GEAR
,..-“1
SYNCROLEVER
UPIOOWN CAM GEAR 1
I
UP/OOWN IOLER 2
UPIOOWN ORIVE GEA? 1
/ UP/OOWNIOLERl
&iKim’\./ I UPIOOWN MOTOR
UPICOWN
ORIVE GE
\i
UP/DOWN IOLER 1
UPIOOWN ORIVE GEAR 2
\
\UPiDOWN IOLER 2
w
UPICK3WNCAM GEAR 2
-5-