SCHEMATIC DIAGRAM (AMP for XE,UK)
PRODUCT SAFETY
NOTICE
Each precaution in this manual
should be followed during
servicing. Components
identified with the IEC symbol
!
!!
in the parts list and the
schematic diagram designated
components in which safety
can be of special significance.
When replacing a component
identified by
!
!!
, use only the
replacement parts designated,
or parts with the same ratings
of resistance, wattage or
voltage that are designated in
the parts list in this manual.
Leakage-current or resistance
measurements must be made
to determine that exposed
parts are acceptably insulated
from the supply circuit before
returning the product to the
customer.
- 86 -
- 87 -
This is a basic schematic diagram.
To Next Page
Loading...
