Automatic Cooking (Cmfd)
EXAMPLE: To cook 3 chicken breasts, you would use Auto Cook course number C5
To do this follow these steps;
1. Touch STOP/CLEAR.
2. Touch AUTO COOK to select
the appropriate automatic
cooking course.
The letter “C” will appear in
the display window and the
light above COOK will flash.
3. Touch a number (single digit,
1-6) to select the course
desired. Touch number “5” to
select the chicken course (C5).
The course number “C5” will
appear in the display window.
The light above COOK will
stop flashing and remain on.
The light above SERVING will
flash. This is to tell you that you
need to enter the number of
servings.
4. Touch a number (single digit,
1-4) to enter the number of
servings to be cooked.
Enter the servings of chicken
by touching
“3”. The word
“C5-3” will appear in the dis-
play window. The light above
SERVING will stop flashing
and remain on.
5. Touch START. The oven will
begin the Auto Cook course
you have selected.
You will see the time “counting
down” in the display window.
6. At the end of the cooking time,
a tone will sound and the word
“End” will appear in the dis-
play window for 2 seconds.
The oven shuts off automat-
ically.
N~E: If you want to keep the food warm after finishing
the cooking cycle, you can use the “Hold Warm” feature.
For detailed instructions on using the “Hold Warm” fea-
ture, see page 8.
N~E: When Auto Cook Key is touched, the letter “H” will appear instead of “C” in the display window for 60Hz
version.
–22–
To Next Page
Loading...
Need help?
General
