fun-Link (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a fun-Link feature and this unit connecting
through an HDMI
cable. You must connect this unit to our brand fun-
Link devices and be sure it's fun-Link (HDMI CEC) setting is also set
to On.
1
Use H I to select fun-Link (HDMI CEC), then press
OK.
On
On
On
Device list
Auto TV on
Auto device off
fun-Link control
USB
Language
Features
Setup
Sound
Picture
2
Use H I J K to select the item you want to adjust, then press
OK.
Set the fun-Link control On or Off. The following additional settings
will be grayed out when you set them to Off.
fun-Link
control
Off
Disables all fun-Link.
On
Selects if you have connected an
external device that is compatible
with the fun-Link function.
You can set your connected fun-Link device to turn off by interlocking
from this unit’s power.
Auto device off
Off
Your connected fun-Link device
stays on even if the unit goes into
standby mode.
On
Your connected fun-Link device
turns
off
automatically
when the unit
goes into standby mode.
This unit will turn on when the power on signal is sent from your
connected fun-Link device.
Auto TV on
Off
This unit stays in standby mode
even if you turn on your connected
fun-Link device.
On
This unit turns on automatically
when you turn on your connected
fun-Link device.
Note(s)
●
Some set-top boxes
are not compatible with fun-Link, this is not a malfunction.
Device list
This function lets you see the product model number or name of
connected devices.
Use H I to select the desired fun-Link devices listed on the TV
screen, then press OK.
Your connected fun-Link device will be turned on if this device is in
standby mode.
BackRefresh
Input Change
Blu-ray disc playerHDMI2
DVD recorderHDMI1
USB
Language
Features
Setup
Sound
Picture
29 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
