Sanyo FWSB426F User Manual

–
7
–
EN
Subwoofer
Rear of Subwoofer
1
2
1
LED indicator
Lights up when the Subwoofer is connected correctly.
Blinks if the Soundbar is Off or in Standby mode, or the
Subwoofer cannot be connected to the Soundbar.
2
CONNECT button
Usually the Subwoofer is connected to the Soundbar
automatically when the Unit is turned On.
Use this button if the Soundbar is not connected the Subwoofer
by accident.
NOTE(S)
• CONNECT button is not a Power-On button. Do not press except to Reconnect to the Soundbar. Refer to “If the
Soundbar is not Connecting to the Subwoofer:” on page 11.
• The feet of the Subwoofer cannot be removed. Do not apply force to them.
• Do not touch the speaker part of the Subwoofer or put Metallic/Magnetic objects close to it. Doing so may cause a
malfunction.

Sanyo FWSB426F Specifications

General

Style	Wireless Soundbar
Color	Black
Channels	2.1
Total Power	-
Speaker Units	Front: 30W x 2
Internal Memory	-
Radio Tuner	-
Wireless Connectivity	Bluetooth 4.2
Interface Connectors	USB Host 2.0
Sound Modes	Night Mode)
Max Sound Pressure Level (SPL)	-
Signal to Noise Ratio	-
Frequency Response	-
Features	Sound Share
Audio Processing	-
Water / Dust resistance	-
Power Supply	-
Power Consumption	Subwoofer 17 W
Battery Life	-
Battery Capacity	-

Weight and Dimensions

Depth	3.1 in
Height	3.1 in
Width	39.3 in
Net Weight	5.31 lbs