Sanyo FWSB426F User Manual

–
8
–
EN
Operating with the Remote Control
1
2
3
4
5
6
7
9
8
10
11
12
13
17
18
19
14
15
16
Buttons Description
1
(POWER/Standby) Press to Turn On the
Unit, or to switch the Unit into Standby mode.
( To completely Turn Off the Unit, you must
unplug the AC Power cord.)
2
Press to switch to the Standard preset sound.
3
Press to switch to the preset sound for Sports
scene.
4
Press to switch to the preset sound for Music.
5
Press to Mute the Sound and press again to
Unmute the Sound.
6
Press to select Optical or Coaxial Input of the
connected device to this Soundbar.
If this button is pressed while Optical or
Coaxial is selected, the Current Input Source
will be switched back and forth between the
two Sources.
Buttons Description
7
Press to select Line Input of a connected
device to this Soundbar.
8
Press to select USB Input of a connected
device to this Soundbar.
9
Press to select Auxiliary Input of a connected
device to this Soundbar.
10
Press to adjust Volume Up / Down on the
Soundbar.
11
Press to switch to the preset sound for a
Movie.
12
Press to switch to the preset sound for News
scene.
13
Press to turn Night Mode On/Off.
14
Press to turn Surround On/Off.
15
Press to select Bluetooth signal of a connected
device to this Soundbar.
16
Press to disconnect the currently connected
Bluetooth compatible Device and start pairing
mode to establish a new connection to another
Bluetooth compatible Device.
If no Bluetooth compatible Device is
connected within 2 minutes, press this button
to restart pairing mode. Pairing mode can only
be started when Bluetooth is selected.
17
Press to Skip Forwards in a music file.
(Bluetooth Mode and USB Mode only)
18
Press to Play or Pause a music file.
(Bluetooth Mode and USB Mode only)
19
Press to Skip Backwards in a music file.
(Bluetooth Mode and USB Mode only)
Remote Control
Installing the Batteries for the Remote Control
Install 2 AAA (1.5V) batteries matching the polarity indicated inside battery compartment of the Remote Control.
1 2 3
• The maximum operable ranges from the Unit are as follows.
– Line of sight: approx. 23 feet (7m)
– Either side of the center: approx. 16 feet (5m) within 30°
– Above: approx. 16 feet (5m) within 15°
– Below: approx. 10 feet (3m) within 30°
NOTE(S)
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, Li-ion, etc) batteries.
• Do not mix old and new batteries.
• Always remove batteries from the Remote Control if they are dead or if the Remote Control is not to be used for an
extended period of time. This will prevent battery acid from leaking into the battery compartment.

Sanyo FWSB426F Specifications

General

Style	Wireless Soundbar
Color	Black
Channels	2.1
Total Power	-
Speaker Units	Front: 30W x 2
Internal Memory	-
Radio Tuner	-
Wireless Connectivity	Bluetooth 4.2
Interface Connectors	USB Host 2.0
Sound Modes	Night Mode)
Max Sound Pressure Level (SPL)	-
Signal to Noise Ratio	-
Frequency Response	-
Features	Sound Share
Audio Processing	-
Water / Dust resistance	-
Power Supply	-
Power Consumption	Subwoofer 17 W
Battery Life	-
Battery Capacity	-

Weight and Dimensions

Depth	3.1 in
Height	3.1 in
Width	39.3 in
Net Weight	5.31 lbs