11
PRIOR TO USE
Check the upholstery of the chair.
●
Check the power cord, remote control cord and sensor controller cord.
●
●
① Insert the power plug into an outlet.
② Set the POWER switch to the “ON”
position.
●
Do not recline the back rest deeply.
●
Do not lean on the back rest forcibly.
●
Do not massage with the back pad flipped to the rear of the back rest.
●
Do not attempt to continuously use the massager on one place for an extended period.
●
Do not attempt to speed up the movement of the massaging rollers or increase the
strength of massage.
Check that the cords are not caught between the back rest and the arm rest, and that they are
not placed beneath the massager.
Check that there is neither breakage nor damage to the cords.
Power switch
Press
Connect the power source.
At first, do not attempt to select a strong method of massaging (until you are
accustomed to massaging).
Otherwise, strong massaging at first may result in injury. Particularly, aged persons and those
who have weak bones need to use the massager with great care.
1
2
3
WARNING
WARNING
Be sure to check that the upholstery
is not torn before using the massager.
If a tear is found, stop using the massager
immediately, disconnect the power plug
from the wall outlet and consult the
place of purchase.
Do not use the massager if the upholstery
is torn, otherwise injury or electric shock
may occur.
To Next Page
Loading...
