EasyManua.ls Logo

Sanyo HEC-DR8700 - Specifications

Sanyo HEC-DR8700
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
34
Do not use the massager on other than the designated voltage.
200 W
Power consumption
30 min.Rated time
Timer
730 mm(28
3
/
4
"
) [width]×1,370 mm (53
7
/
8
"
) [depth]×1,220 mm (48
"
) [height]
When upright (with foot rest retracted)
730 mm (28
3
/
4
"
) [width]×1,940 mm (76
3
/
8
"
) [depth]×760 mm (29
7
/
8
"
)[height]
When reclined (with foot rest set horizontally)
Dimensions
Approx. 90 kg (198 lbs)Weight
Cord length
Stand, Installation screws (Three)Accessories
Synthetic leatherUpholstery
One up/down pass in approx. 34 sec.
Vertical movement speed
(5 stages) Approx. 63140 mm
(
2
3
/
8
"
5
1
/
2
"
)
Tapping
(5 stages) Approx. 63140 mm
(
2
3
/
8
"
5
1
/
2
"
)
Spine stretching
Partial stretching (Partial): Repetition within Approx. 210 mm (8
1
/
4
")
Partial stretching (Focus): Repetition within Approx. 110 mm (4
3
/
8
")
Range of partial stretching
Approx. 780 mm (30
5
/
8
")
Massager rollers up/down range
No gradation or approx. 1 cm (
3
/
8
") /one press of button
Height adjustment of massaging rollers
Approx. 120170°Reclining angle
Reclining method
Lower body massaging
(Air pressure)
33 W
Approx. 2.1 m (82
5
/
8
")
Power dissipation of electric heating equipment
Back rest: Motor-driven type (Linked with foot rest)
Foot rest: Motor-driven type (Foot rest only)
Seat surface: Motor-driven type (Linked with back rest and foot rest)
(3 stages) Approx. 1127 kPa
There is a slight difference according to the part.
(5 stages) Approx. 924 times/min.Gripping
(5 stages) Approx. 1030 times/min.
(5 stages) Approx. 300600 times/min.
(5 stages) Approx. 414 times/min.
Kneading(up/down)
Tapping
Shiatsu
WHOLE BODY SENSOR AUTOMATIC COURSES
FULL AUTO・・・・・・・・・・・・・Approx. 17 minutes
STIFFNESS, RECOVERY, RELAX・・・・Approx. 15 minutes
QUICK Course・・・・・・・・・・・・・Approx. 8 minutes
(Maximum of approx. 20 minutes due to stiffness detection)
AUTOMATIC COURSES・・・・・・・・・Approx. 15 minutes
MANUAL COURSES・・・・・・・・・・・Approx. 15 minutes
Frequency
Width
Vertical stroke lengthapprox. 660 mm(25
7
/
8
")

Other manuals for Sanyo HEC-DR8700

Related product manuals