Sanyo HEC-DR8700 - Foot Rest Storage and Home Position

15
Back rest
Foot rest
■
●
The HOME POSITION button lights up
and the chair automatically returns to
its home position.
●
Adjust the position (sliding length)
of the foot rest.
Adjust the position (sliding length)
of the foot rest to fit the length of
your legs.
●
While pulling the slide lever for the foot rest,
set the foot rest in the desired position. Release
the slide lever to lock the foot rest in position.
(Foot rest sliding length : Maximumapprox. 21 cm (8
1
/
4
"))
●
●
●
●
To return the massager to the home position, press the HOME
Press
The foot rest is raised first, and then
lowers completely.
Foot rest
Push the foot rest
with your soles
to extend.
Raise your feet slightly
to retract.
Slide lever for foot rest
Pull the lever toward
you. Release when
desired position is
achieved.
Pull the lever toward
you. Release when
desired position is
achieved.
7
ADJUSTMENT OF CHAIR (continued)
Do not attempt to stand on the foot rest when the foot rest slide position and angle are not completely
returned to the home positions.
If this is not done, the user may fall over, resulting in an accident or an injury, and the floor may be damaged.
Do not attempt to adjust the foot rest slide while reclining.
If this is not done, accidents or injury may occur.
Be careful not to put your hand or foot into the spaces between any moving parts, including into
the space between the back rest and arm rest or into the space at the underside of the back rest
or between the foot rest and the seat or into the space under the foot rest. Furthermore, do not
place your hands, feet or head inside the upholstery of the massager.
If this is not observed, accidents or injury may occur.
WARNING
Be sure to check that there is no person (children
in particular), or any pets under the foot rest and
that there are no other obstructions in the way
before reclining the back rest or lowering the foot
rest or when using the stretch. In addition, do not
leave the foot rest in the raised position when not
in use.
If this is not observed, accidents or injury may occur.
POSITION button.