EasyManua.ls Logo

Sanyo HEC-DR8700 - Individual and Combined Manual Roller Massages

Sanyo HEC-DR8700
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
MASSAGING
(MANUAL [ROLLER] COURSES)
(continued)
24 types of desired massage can be selected.
Individual massages
Types of massage and adjustments of massaging rollers
It is possible to adjust the movement speed, height position and width of massaging
rollers and the strength of massage. (There are some adjustments that are not
possible, depending on the type of massaging. Refer to the tables below.)
Type of
massage
Shiatsu massaging
Kneading while gripping shoulders
Kneading upward
Kneading downward
Tapping
Combined tapping and kneading
actions
Spinal stretch along the entire
length of back
Spinal stretch along an 210 mm
(8
1
/
4
")
region of back
Spinal stretch along a 110 mm
(4
3
/
8
")
region of back
Operation
Adjustment of massaging rollers
Height
Speed
Width
Strength
●:
Adaptation
−:
No adaptation
If you have felt abnormal physical sensation
or want to stop the massager immediately.
Press the OPERATION ON/OFF button. Press the INSTANT STOP button.
Press the button for the current operation.
To stop the massage during operation.
All the massaging will stop.
(The massaging rollers are moved
to the upper position and remain
in that position.)
The massaging that corresponds to the
pressed button will stop. (The Massaging
rollers will stop at that point.)
All the massaging will stop and the lamp of
the remote control will turn off.
When you want to restart massaging, press
the OPERATION ON/OFF button.
(The massaging rollers move to the upper
position and remain in that position.)
After the movement, repeat the operation to
begin a massage.

Other manuals for Sanyo HEC-DR8700

Related product manuals