Sanyo LCD-32CA8Z - Volume Control; Bass Expander; Surround; Still

18
BASIC OPERATION
BASS EXPANDER
Press BASS button to switch the bass expander function On or Off.
When it is set On, "Bass Expander On" will appear on the screen for a
short while.
SURROUND
Press SURROUND button to switch the SURROUND function On or
Off. When it is set ON, "Surround On" will appear on the screen for a
short while.
VOLUME CONTROL
To adjust the volume value desired by pressing VOLUME(+/-) buttons
on Remote Controls or on Side Controls. The volume dialogue box will
appear on the screen for a short while.
Press VOLUME(+) button to increase volume, and press VOLUME(-)
button to decrease volume.
SIDE CONTROLS
VOLUME(+/-)
buttons
VOLUME(+/-) buttons
BASS button
SURROUND
button
REMOTE CONTROLS
REMOTE CONTROLS
REMOTE CONTROLS
STILL
Press STILL button to switch the still function On or Off.
When in PIP or POP mode, this still function can still main and sub pic-
ture at the same time.
REMOTE CONTROLS
Press STILL button to cancel "Still" function.
STILL PICTURE NATURAL PICTURE
STILL button
Inst. Manual - CA8Z.indd 18 6/27/2007 5:45:21 PM