31
MENU OPERATION
This feature is used to remove unwanted channels from the channel
scanning memory.
You can skip the unused or undesired channels when you are select-
ing a channel using CHANNEL UP/ DOWN (Ÿź) buttons.
For example, to skip Program "04" :
0 2
0 3
0 5
skip
Skip
Select "AUTO" , "PAL", "SECAM" ,"NTSC" or "NTSC4.43" by pressing
VOLUME(+/-) buttons.
Color System
Manually tune a channel if it cannot be automatically tuned, such as
when the signal is poor.
1 Select channel “6”.
2(QWHULQWR781(5PHQXSUHVVLQJWKH&+$11(/83'2:1Ÿ
źEXWWRQVWRVHOHFW0DQXDO6HDUFK
3 Press VOLUME(+/-) buttons to start the channel searching.
ŶThe VOLUME(+) button will move tuning toward the higher
frequencies, and the VOLUME(-) button will move tuning toward the
lower frequencies.
ŶPress and hold the VOLUME(+) or (-) button to search for required
TV station.
ŶPress BACK button to return to the previous menu.
ŶPress MENU button to exit menu operation.
Manual Search
When the clear sound could not be obtained, select "AUTO", "B/G",
"D/K", "I" or "M" by pressing VOLUME(+/-) buttons.
Sound System
Manual Search
1
ŻŹ
Search Return Exit
MENUBACK
MANUAL SEARCH MENU
1 Select channel “4”.
2 Follow steps 1-2 on page 30 to enter into "Tuner" menu, pressing
WKH&+$11(/83'2:1ŸźEXWWRQVWRVHOHFW6NLS
3 Press VOLUME(+/-) buttons to select "On". (If you want to cancel
the skip channel, please select "Off".)
ŶPress BACK button to return to the previous menu.
ŶPress MENU button or wait for 5~60 seconds (refer to "Du-
ration" on page 33) to exit menu operation.
0 4
Note:
ŶYou can also use the SOUND SYSTEM button to select suitable
sound system directly.
ŶWhen the selecting sound system is AUTO, it will detect receiving
sound system automatically and may change the reception sound
system of this LCD TV.
ŶIf the selecting sound system is not suitable, the sound may lost from
the TV set. Selecting the suitable sound system may improve the
sound quality.
Inst. Manual - CA8Z.indd 31 6/27/2007 5:45:34 PM