CONTENTS
INTRODUCTION P. 2
PRECAUTIONS FOR SAFE OPERATION P. 3
LABELS ON THE INCUBATORS P. 6
ENVIRONMENTAL CONDITIONS P. 7
INCUBATOR COMPONENTS P. 8
Control panel and keypad P. 10
Remote alarm terminal P. 11
INSTALLATION SITE P. 12
INSTALLATION P. 13
Connection of CO
2
gas cylinder P. 14
PREVENTING CONTAMINATION P. 15
PRECAUTIONS FOR CULTURES P. 16
START-UP OF INCUBATOR P. 17
SETTING THE CHAMBER TEMPERATURE AND CO
2
DENSITY P. 18
UV LAMP
(MCO-18AC(UV) or MCO-18AC with MCO-18UVS3)
P. 19
Precautions when using the UV lamp P. 20
Setting the UV lamp ON period P. 21
Lighting the UV lamp for 24 hours P. 22
KEY LOCK FUNCTION P. 23
WATER LEVEL SENSOR
(MCO-18AC(UV) or MCO-18AC with MCO-18UVS3)
P. 24
ALARMS, SAFETY, AND SELF-DIAGNOSIS P. 25
SETTING OF ALARM RESUME TIME P. 26
Operation after power failure P. 26
ROUTINE MAINTENANCE
Cleaning the chamber and inner attachments P. 27
Filling the humidifying pan P. 30
CALIBRATION
Temperature calibration P. 31
CO
2
calibration P. 32
TROUBLESHOOTING P. 33
DISPOSING OF THE CO
2
INCUBATOR P. 34
AUTOMATIC CO
2
CYLINDER CHANGEOVER P. 39
STACKING INCUBATORS P. 40
SPECIFICATIONS P. 42
PERFORMANCE P. 43
SAFETY CHECK SHEET P. 44
1
To Next Page
Loading...
