Sanyo MCO-5M - User Manual

55
Instruction manual
xThis section is extracted and printed from Instruction Manual.
xIf you find out “Refer to page
ƔƔ” in them, this page means not page in service manual
but page in the lower corner of each page in the extract from Instruction manual.
This page number is not corresponded with serial number in Service manual.

Sanyo MCO-5M Specifications

General

Brand	Sanyo
Model	MCO-5M
Category	Accessories
Language	English

Summary

PRECAUTIONS FOR SAFE OPERATION

INCUBATOR COMPONENTS

Control Panel and Keypad

Details the function and indicators of the control panel and its keys.

Remote Alarm Terminal

Describes the location and function of the remote alarm terminal.

INSTALLATION

Installation Site

Specifies the recommended location conditions for installing the unit.

Installation Steps

Outlines the procedure for preparing and physically installing the unit.

OPERATING INSTRUCTIONS

Control Panel Operation

Explains how to use the control panel keys for basic operations.

UV Lamp Operation

Provides instructions and precautions for operating the UV lamp system.

Automatic Gas Cylinder Changeover

Describes the automatic switching system for gas cylinders.

Key Lock Function

Details how to enable or disable the key lock feature on the control panel.

ALARMS & SAFETY FUNCTIONS

Alarms and Safety Functions Table

Lists various alarms, their situations, indications, and safety operations.

Operation After Power Failure

Explains how the incubator resumes operation after a power interruption.